How to fix paper jam in a canon printer

Our Canon printer support team are here to solve your all issues and fix it within a minutes. So,  When canon printer operating with any printer, it’s inevitable that you simply can encounter a paper jam through our canon printer support. the subsequent could be a general guide for removing paper that has become stuck in one or additional locations. though newest printers ar similar in style, you’ll have to be compelled to create slight changes to the subsequent steps, looking on the whole and model of your printer.

How to fix paper jam in a canon printer

you’ll be wanting to avoid pull stuck paper out from beneath the front cowl if attainable, because it might cause injury to the printer. Instead, pull it from the rear of the printer or paper receptacle.

Note: it’s necessary that you simply undergo all of the subsequent sections to avoid injury to your printer.

Fix paper jam issues through our canon printer support

 Locate your  and take away any paper stuck within the loading receptacle

  • Remove any loose paper within the loading receptacle.
  • Press the Resume button on the front of the printer.

Note: If the paper jam is cleared, skip to the make sure the printer carriage will move freely section. Otherwise, continue with the steps below.

Remove stuck paper one sheet at a time, beginning within the middle.

Check for any remaining bits of paper.

Note: If the paper jam is cleared, skip to the make sure the printer carriage will move freely section. Otherwise, still successive section below.

Clearing the jam from rear of the printer

If you cannot get to the paper jam from the loading receptacle, follow the directions to clear the paper from the rear of the printer. Usually, the rear of the printer has either a rear exit door or a two-sided printing accent.

Removing a rear access panel

Locate the knob or access tab on the rear of the printer by or on the panel itself. If it is a knob, move it to the unsecured position.

  • Remove the panel and thoroughly pull out the crowded paper.
  • Locate and withdraw any tiny bits of paper that stay.
  • Replace and secure the rear panel.
  • Remove the two-sided printing accent to clear the paper jam

Press each unleash buttons on either finish of the module at a similar time and take away it.

  • Remove the panel and thoroughly pull out the crowded paper.
  • Locate and withdraw any tiny bits of paper that stay.
  • Push the module back on and snap it into place.
  • Note: If the paper jam is cleared, skip to the make sure the printer carriage will move freely section. Otherwise, continue with the steps below.
  • Press the button on prime of the module and open the door.
  • Remove the panel and thoroughly pull out the crowded paper.
  • Locate and withdraw any tiny bits of paper that stay.
  • Close the rear module door.
  • Note: If the paper jam is cleared, skip to the make sure the printer carriage will move freely section. Otherwise, still successive section below.

Pulling paper out from beneath the front cowl

If all of the previous steps have failing, you’ll commit to take away the crowded paper by pull it out from beneath the front cowl fastidiously and SLOWLY. Remember, as declared higher than, this step is mostly not suggested and may solely be a final resort.

Tip: If you have got a electrostatic printer, you’ll got to take away the toner cartridge before you’ll get full access to the paper.

Ensure the printer carriage will move freely.

Disconnect the printer from power by unplugging the ability twine from the ability outlet.

Watch the carriage to examine if it moves all the thanks to the proper aspect of the printer and out of sight. don’t force the carriage to maneuver if it’s stuck, as this might injury your printer.

Note: If the paper jam is cleared, skip to the testing the printer section. 

Carefully take away the ink cartridge

  • Without removing the drawer, take away any paper within the loading receptacle.
  • Remove the two-sided printing accent (module) or rear exit door.
  • With your fingers, rotate the rollers toward the highest of the printer for 3 full rotations.
  • Replace the two-sided printing accent (module) or rear exit door.
  • Replace the ink cartridges.
  • Plug in and switch on your printer.
  • Reloading and testing the printer
  • Once you have removed the jam, cleared away any remaining bits of paper, and ensured that the print carriage will move while not issue, check your printer.
  • Put some inkjet paper into the loading receptacle and slide it into place.
  • Print a check page by acting a self-test. Usually, a self-test may be initiated by pressing and holding the Resume button till the printer starts printing.
  • Continued issues? attainable printer hardware problems
  • If the printer claims there’s still a paper jam when researching the steps higher than, your printer might have a hardware downside that’s inflicting the problems. A haywire roller or components within the device mechanism will create a printer assume it’s a paper jam.

In the case of a hardware downside, it’s going to be attainable to own the printer repaired.  You can take our expert help through our cannon printer support our experts will solve your all issues within secount.

Preventing a printer paper jam on canon printer

As mentioned earlier, paper jams are associate degree sure thing over the lifetime of your printer. However, if you are encountering frequent paper jams, the subsequent steps might facilitate forestall them.

If your printer features a paper receptacle, don’t fill the receptacle to capability. Overfilling the paper receptacle is usually the reason behind paper jams.

Many printers have slippery mechanisms that enable differing types and sizes of paper to be fed into the printer. If the slider isn’t properly positioned, it will cause a paper jam.

Use customary workplace paper. Folded, labeled, and specialty paper will typically cause jams as a result of they need irregular dimensions. If you are unsure that styles of paper your printer accepts, consult the printer documentation.If you’re printing multiple pages, don’t combine the paper sizes.Make sure your printer paper is properly seated into the slot or receptacle.

Examine the printer for any rubbish before printing. Previous paper jams, torn paper, printing labels or different foreign objects within the printer will cause reoccurring jams.

Add a Comment

Your email address will not be published. Required fields are marked *